.jpeg)
.jpeg)
| Stock n° | 15493 |
|---|---|
| Control | FANUC 30i A5 |
| Number of axis total | 7 |
| X axis | |
| Total stroke | 410 mm |
| Power | 2.5 kW |
| Y axis | |
| Total stroke | 200 mm |
| Power | 4.8 kW |
| Z axis | |
| Total stroke | 400 mm |
| Power | 7.2 kW |
| Résolution (X-Y-Z) | 0.0001 mm |
| Travel speed | 50 m/min |
| W axis | |
| Total stroke | 310 mm |
| Power | 2.5 kW |
| Resolution | 0.0001 mm |
| Travel speed | 40 m/min |
| Turning function | |
| Principal spindle | |
| Spindle speed | 30'000 t/min |
| Total stroke | 360 ° |
| Bar diameter | 50 mm |
| Installed power | 15 kW |
| Speed | 6'000 t/min |
| Sub spindle | |
| Total stroke | 360 ° |
| Bar diameter | 32 mm |
| Installed power | 15 kW |
| Speed | 6'000 t/min |
| Torque | 22/27/36 Nm |
| B-axis | |
| Installed power | 4.3 Kw |
| Total stroke | +25 / -115 ° |
| Resolution | 0.0001 ° |
| Peripheral speed | 36'000 °/mn |
| Tool changer: | |
| Number of positions | 90 |
| Type | HSKA40 |
| Time of tool changing | sec. |
| Tool diameter max. | mm |
| Tool lenght max. | mm |
| Tools weight max. | gr. |
| Memory | 8 Mbyte |
| Over-all dimensions | |
| Length | ~2200 mm |
| Depth | ~2400 mm |
| Height | ~2490 mm |
| Weight | ~ 4400 Kg |
| Voltage | |
| Power drawn by the machine | 35 kVA |
| Power supply | 3x400 VAC, 50/60 Hz |
| Nominal current | max. 50 A |
| Number hours (under power) | h |
| Number hours (milling) | 17'380 h |
| Cooler | MARKSA CSW 800 |
| N° | 14.000788.4 |
| Cooler | MARKSA CSW 300 PB |
| N° | 14.000575.5 |
copyright © 1998 - 2025 Greub Machines SA
All products, logos, trademarks or registered trademarks shown or mentioned belong to their respective owners.
