(1).jpeg)
(1).jpeg)
(1).jpeg)
.jpeg)
(1).jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
.jpeg)
| Stock n° | 15511 |
|---|---|
| Nc-control | HEIDENHAIN TNC 355 |
| Taper in spindle: various: | SF 32 |
| Drill capacity in steel | 0.3-20 mm |
| Drill capacity in cast-iron | 24 mm |
| Threading in steel: | 1-16 M (Metrisch) |
| Thread cutting in cast-iron | 18 M (Metrisch) |
| Milling capacity | 20 cm3/Min |
| Spindle stroke | 120 mm |
| Spindle speeds :stepless | |
| From | 50 t/min |
| Up to | 9200 t/min |
| Spindle motor | 4 kW |
| Torque max. | 45 Nm |
| Table length | 730 mm |
| Table width | 280 mm |
| Longitudinal travel | 420 mm |
| Transversal travel | 240 mm |
| Vertical travel | 450 mm |
| Precision | 0.001 mm |
| Feeds | 1-7200 mm/min |
| Min. distance from table to spindle | 0 mm |
| Distance table to spindle max. | 560 mm |
| Table load max. | 75 kg |
| Part dimensions | 274 mm |
| Voltage | 3x380 Volt |
| Power | 10 Kw |
| Nominal current | 16 A |
| Overall dimensions machine | |
| Length | 2000 mm |
| Width | 1500 mm |
| Height | 2350 mm |
| Weight | ~ 1300 kg |
copyright © 1998 - 2024 Greub Machines SA
All products, logos, trademarks or registered trademarks shown or mentioned belong to their respective owners.
